Motherboard Parts Explained

The motherboard is an essential component that is in charge of smooth processing of data occurs on a computer. There was a little damage to the hauptplatine will cause damage to the complete system, because the motherboard is place for all the components fastened. Start from the images card, RAM, hard drive, optical drive, all mixed as one unit by using the port in the motherboard. Below is set of general motherboard part:Notebook Ventilator

CPU Socket: This section is the place placed a processor even with the many small openings that are being used to place a pin processor.
GOOD OLD RAM Slots: Places to set up the memory module (RAM). For a modern hauptplatine, usually there are 4 slots DDR2 PC 6400 with a capacity of up to 8GB and support for dual-channel construction.
Power Port: Old type use 20 +4 pin number, while new types have used 24 +4 pin number. Through this port all the ability needed by the system provided by the ability supply.
Serial ATA Slot: The new type mainboard using this port. Generally there are 4 to 8. It can be used for hard disk drives where using SATA interface. Cable connection that can be used is usually less space-consuming than the GAGASAN cable. SATA technology is growing rapidly, at this point is to reach the next technology of SATA-2 with data transfer boosts to 3Gb/s.
IDE Port: It is merely found in old type of motherboard. That is employed to install the hard disk drive and optic drives, it has an large size of the cable width.
Chip-set: A chip that regulates the data traffic on the system. There are 2 types of chip placed with a different function with one another. North-bridge chip-set is located involving the processor and RAM slots. This chip-set works so RAM and processor modules can work together (set of traffic data between the CENTRAL PROCESSING UNIT and RAM). South-brigde chip-set is located on the bottom. Either the underside of the processor or under the slot for images cards. Chip-set handle this work flow of traffic data from the design card, hard disk and other motherboard peripherals.
AGP / PCI Express Slot machine: Used to install the graphics card. AGP position is rarely found in the new type, because the resulting bandwidth is not sufficient for the needs of graphics at this time. Now, just about all motherboards use the PCI Express slot, with a bigger bandwidth. In fact, there are motherboards which may have up to 4 PCI Exhibit slots.
PCI (Peripheral Aspect Interconnect): Is the location to put additional cards such as sound card, LOCAL AREA NETWORK card, TV tuner, and others. It is working at 33 Mhz regularity.
BIOS (Basic Input Outcome System): Form of software that is embedded in the motherboard where the energy supplied from the motherboard battery. All primary configuration of the hardware that is installed can be accessed and improved through the BIOS.
Various motherboard manufacturers other products that come with many additional features that will make the compatibility of various hardware increase.

Leave a Reply

Your email address will not be published. Required fields are marked *